Aires Shield Pro

Multiple studies were conducted proving significant effectiveness of the product in reducing the harmful effects of electromagnetic radiation. Find out more here

Our product doesn’t block EMR/EMF, by doing so it will block the function of the device that emits the signal. Testing the device with an EMR/EMF meter will not show you a significant reduction of the EMF because instead of blocking the field we are modifying it, not necessarily reducing its intensity. Alternatively, you could test the effectiveness of the device by measuring the change in body’s response to an EMR emitting device with and without our product being applied to it. This could be tested using an encephalographic and other similar devices under laboratory conditions. You can read about verifying the effect here: View Peer-review

The topological circuit of the Aires patented microprocessor’s resonator antenna accumulates charges. A cell phone’s or other electronic device’s “electromagnetic impulse generator” serves as the source of these charges. When an excess charge (polarization) has built up, it is automatically redistributed to the Aires microprocessor, which uses the charge to cause a coherent transformation of the field in the form of a hologram – made up of regularly alternating maxima and minima. The hologram interacts with external radiation, restructures it (forward and reverse Fourier transform) and matches it with a person’s own radiation, thus eliminating conflict between the external radiation and the radiation from the human body’s cells.

The Aires Shield Pro does not require any external power. It is a passive device powered by the electromagnetic field of devices around it.

A Printed Circuit Board with gold immersion coating and a Monocrystalline Silicon wafer chip, polymer protective layer and adhesive layer.

The Aires Shield Pro has been designed to work effectively on any data transmitting devices such as: cell phones, smart phones, tablets, laptops, PC’s, smart TV’s, Wi-Fi router’s, smart meter’s, etc..

For best results the Aires micro-processor should be applied in the center of the device on the front or the back panel. The device can be applied anywhere on smaller devices such as: cell phones, smart phones, tablets.

Yes, the Aires Shield Pro can work with a protective case. It can be applied on top or underneath it.

Yes, one is enough for small devices, such as: cell phones, smart phones, tablets, Wi-Fi routers, etc… It is recommended to use multiple Aires Shield Pro units for larger devices, such as: smart TV’s, PC’c and large computer screens.

The Aires Shield Pro will continue working and will be effective while its structural integrity is preserved. Physically damaging the Aires Shield Pro or separating its original adhesive layer from the device it is applied to will impair Aires Shield’s performance.

No, you can apply it on a device once. The Aires Shield Pro could be damaged if you try to remove it and reapply it elsewhere. The adhesive layer will lose it’s hold if removed.

No, it will not interfere with the operation of your device.

Full Warranty

• A one-year manufacturer warranty on item defects, from the date of purchase.
• Each manufacturer warranty claim must be made within the one-year period.
• All products must be returned in accordance with our Return Policy.

Limited Warranty

• Products purchased directly from www.airestech.com will be covered for an additional 30 days from the date of purchase for any physical damage, excess wear and tear.
• Each warranty claim must be made within the 30-day period for a replacement to be issued.
• All Products must be returned in accordance with our Return Policy.

The only adequate test to verify the effectiveness is to measure the human response to EMR with and without the device. The device cannot be tested at home as the testing procedure requires specialized equipment to measure the person’s physical condition after or during interaction with EMR. You can read about verifying the effect here

The recommended coverage diameter of the effective influence of the Aires Shield Pro is ~ 1.5 m. Find out more here

The tested frequency range is between 24Hz to 28Ghz (5G). For more details please see “Computer Modelling Calculations” here

Your magnet will not have an effect on the use or function of the Aires products.

The product is 17.4mm (0.68in) in diameter.